When you are out in the open waters, a life raft can mean the difference between life and death. The ability to successfully deploy your life raft during a maritime emergency is an invaluable skill that every seafarer should acquire. Fortunately, modern life rafts are designed to be simple and intuitive to use, inflating within seconds and requiring minimal physical effort. We will guide you through the step-by-step process of deploying your VIKING life raft correctly and efficiently.
1. Secure the Painter Line
The painter line is a line, approximately 30 feet (10 meters) long, that is attached to the life raft. To begin the deployment, fasten this line to a strong point on your boat, preferably a cleat. This line is crucial as it ensures the life raft remains attached to your vessel during deployment.
2. Prepare for Deployment
To prepare for throwing the life raft overboard, first, pull out about 10 feet (3 meters) of the painter line. Importantly, there's no need to open the valise or remove the plastic strapping on the container before deployment. These modern life rafts are designed to deploy while still packed in their storage container.
3. Throw the Life Raft Overboard
Life rafts are naturally buoyant and will not sink, so do not deploy the life raft on deck. Instead, toss it overboard. You should aim to deploy the life raft to the leeward side, using the vessel to shield the raft from wind and waves. However, if the vessel is on fire, launch the life raft to the windward side to avoid the smoke and flames.
4. Deploying the Life Raft
Once the container or valise is in the water and the painter line is secured to your vessel, grab the painter line with both hands and give it a hard, continuous pull. This action triggers the CO₂ inflation mechanism inside the life raft. You’ll feel resistance as the raft starts to inflate.
5. Board the Life Raft
Once the life raft is in the water, pull it toward the vessel using the painter line. If possible, jump directly from the vessel into the life raft, trying to stay as dry as possible. This is safer and more efficient than trying to swim to the raft.
5. Stay Attached Unless Necessary
Maintain the connection between the life raft and the vessel by keeping the painter line attached, unless the vessel is sinking or on fire. If you need to sever the line, a knife can be found attached to the upper buoyancy tube on the right-hand side of the canopy entrance.
6. Use Signal Flares Wisely
Signal flares are an essential part of your emergency toolkit, but they should only be used when you are sure that help is within sight. Premature use may result in wasted resources and a decreased chance of rescue.
7. Read the Manual
The manual included with the liferaft contains detailed step-by-step emergency instructions. Make sure you read and familiarize yourself with these instructions before setting sail. Knowledge and preparation can be the most crucial elements in a crisis situation.
Tutorial Video:
Knowing how to deploy a life raft is a fundamental part of safety at sea. While we hope that you never find yourself in a situation where you need to use this knowledge, being prepared can save lives. Remember: your life raft is your life insurance on the open seas – know how to use it.
Shop all VIKING life rafts.